slider

Residential Wireman

$499.00

Category:

Description

This new program has five practice tests with over 395 questions for you to study. Questions, answers, and article references that you need to pass the new PSI state examination are contained in this module. Choose this program if you are serious about passing your state exam with PSI. Go into the test prepared with the best computer study program in Texas !!!

 

Here is a small sample of our exam prep questions:

  • Swimming pools must be installed with all metal parts bonded together with a copper conductor not smaller than ___?
              Answer: 8 AWG. Reference: NEC 2011 680.26(B).
  • How many amperes of current draw would you have given a 7,000 W load is supplied by a 240 Volt source?
              Answer: 29.2 Amps. Reference: I=P/E, 7,000 VA / 240 V = 29.2 Amps.
  • What minimum conductor size is required given a load of a single phase, 3 HP motor operating 208 Volts that will be run continuously?
              Answer: 12 AWG copper. Reference: Table 430.248, 430.22(A), Table 310.15(B)(16), 18.7 A x 125% = 23.4 Amps.

Our Residential Appliance Installer software is an interactive program that allows each license candidate to prepare and study for his state examination while in the comfort of his own home. Our practice exams actually simulate the experience of taking the computerized state examination. The questions, multiple choice answers, and article references have been professionally prepared by our research team to cover every subject area, code section, and calculations. The combination of specific computer based training with our software, familiarity with the code book, and your years of field experience assure your success. Prep At Home today!

 

PSI Candidate Information Bulletin, Examination Content Outline:

Texas Content Outline, Residential Appliance Installer

 

With our exam prep program you will be able to go into an examination with confidence knowing exactly what types of questions to expect, what reference materials are used, and how the questions are written and phrased. Familiarity with these code and text book questions is a must to pass your state examination. Timed computerized exams can be difficult without preparation. Therefore, practicing sample tests, questions, answers, and code references repeatedly is critical for you to become an effective test taker. Our program has a Study and Review mode that allows you become familiar with the material prior to taking your sample tests. The Test mode allows you to gauge your understanding of the variety of topics that will be required to pass the state exam. Our questions are scrambled each time you test to simulate your actual state test experience. Your goal with our program is to get your test scores at home above 95% within the time limit of your exam.

 

The following reference materials are allowed in the examination center:

  • NFPA 70 National Electrical Code, 2011. National Fire Protection Association (NFPA), (800) 344-3555. www.nfpa.org

Important Notes:

  • Candidates are responsible for bringing their own references to the examination center. Reference materials may be highlighted, underlined and/or indexed prior to the examination session. (Permanent tabs and highlighting is permitted. No notes !!!)
  • Although it is not recommended, the 2008 NEC Code Book will be allowed in the Examination room in lieu of the 2011. The examination questions are based on the 2011 code.

The trend has been over the last 5-10 years for the state examinations to be developed out of the code books that the State and the inspectors have adopted, rather than base questions on practical or hands-on experience. This is the main reason that our software program is so vital to your exam preparation. The majority of our customers are experts when it comes to installation and service for their specific trade, but are not proficient with timed computer examinations that are based on text and code book topics. Since we know that you are going to have to answer questions from specific code book sections, we focus our effort to develop exam prep materials for those sections. This allows you to focus your time and effort on these topics, and not misuse your time simply reading through the code book.

 

Application for State Licensing must be submitted to TLDR at:

Texas Department of License and Regulation
P.O. Box 12157, Austin, TX 78711
Phone: (512) 463-6599 or (800) 803-9202
Web Site: www.license.state.tx.us

  • License candidates must be pre-approved by Texas Dept of Licensing and Regulation prior to testing with PSI.
  • Applications submitted to TDLR are usually processed in 2-3 weeks, at which time TDLR will mail each license candidate a letter or postcard to indicate approval to take the examination with the testing agency PSI.

Examinations are administered by PSI:

PSI Services LLC
3210 E. Tropicana, Las Vegas, NV 89121
Phone: (800) 733-9267
Web Site: www.psiexams.com

  • Be sure to carefully review your Candidate Information bulletin prior to your examination. This document contains important information regarding testing locations, fees, dates, examination content and reference materials used to make the examination.

License Requirements Summary:

  • 80 question exam, 4 hour time limit, minimum test score 75%
  • State Application Fee = $40
  • PSI Test Fee = $63
  • No work experience verification required.

Why wait? Our program is very simple to install and run on your personal computer, empowering you to Prep At Home immediately. Start your studies today!

Additional information

Weight 10 oz